How To Change Water Filter On Keurig 2.0

Your Keurig might aid drag you out of bed each forenoon with the smell of coffee. But just every bit your Keurig takes intendance of y'all, yous must also take care of it, else the coffee it brews and the car itself will degrade over time.

Not only should you lot clean your Keurig past descaling it every three to vi months, y'all should likewise replace thewater filter every few months. Here's how.

Now playing: Watch this: How to clean your Keurig with distilled vinegar

1:32

When to supervene upon a Keurig charcoal filter

The purifying filter in the water reservoir on your Keurig is designed to concluding a finite number of brew cycles, non whatever particular length of fourth dimension. The less yous use your Keurig, the less frequently y'all should need to supersede it.

Keurig says its filters should be inverse every two months. Only if you're not brewing every day, it suggests yous change the filter every 60 tank refills. You could also get into the addiction of descaling the Keurig every other filter change.

Some newer Keurig models permit you to set a h2o filter reminder then there'due south no guesswork in when y'all should replace the filter.

Like any other charcoal filter, in one case it's spent, it will no longer filter the water in the reservoir like it should. This will non only affect the quality of the coffee, but can affect how quickly particulates will build up within the machine.

Well-nigh newer Keurig models (save for office-style, Rivo and K200 models) apply the same charcoal filters, and they can be found in most major retailers that sell Keurigs. You lot can also notice them online for as piffling every bit 65 cents each (they're about 90p in the Great britain or AU$4 in Australia).

How to replace a Keurig charcoal filter

keurig-filter-change — Jason Cipriani/CNET

Once the existing water filter in your Keurig is spent, replacing it with a new 1 will take less than 10 minutes.

Get-go by soaking a new charcoal filter in a cup of water for 5 minutes or so.
While the new filter is soaking, remove the former filter by gently pulling up on the filter holder.
Remove the clip that holds the filter in place by pressing in both sides.
Discard the spent filter.
After the new filter has soaked for 5 minutes, rinse information technology for 60 seconds.
Rinse the filter holder and the bottom clip.
Insert the new charcoal filter into the filter holder and reinstall the clip that holds it in place.
Rotate the punch to the month that you should replace the filter next. (Older filter holders only highlight a single month, while newer ones highlight the engagement yous installed the new filter and when yous should replace it.)
Reinstall the filter holder in the water reservoir by firmly pressing until it locks into place.

Subsequently that, you'll be ready to brew for a few months without having to worry about the water filter.

Note that if you lot experience the water filter isn't doing its job and you don't have a replacement on manus, you lot can likewise use prefiltered water in a pinch.